Kodi / XBMC for Wandboard

From Wandboard Wiki
Revision as of 09:07, 11 May 2015 by Tapani (Talk | contribs) (How to make an Kodi (XBMC) SD card for the Wandboard)

Jump to: navigation, search

How to make an Kodi (XBMC) SD card for the Wandboard

First, download the rootfs from http://download.geexbox.org/snapshots/

Choose rootfs named geexbox-devel-20150507-r7ff0910.cuboxi.tar.xz

SD card creation

About instruction:

Step 1. Build u-boot bootloader.

Clone u-boot from https://github.com/wandboard-org/u-boot-fslc.git

Build u-boot from (We use the SPL u-boot, since that can boot on all Wandboard variants)

Step 2. Prepare kernel

Build kernel as a zImage from https://github.com/wandboard-org/linux

make wandboard_defconfig make zImage

Step 3. Prepare device tree

Build kernel dtb from https://github.com/wandboard-org/linux

Step 4. Partition the SD card Partition your SD card in two partitions, but leave some space before your first partition, around 128kB is more than enough.

partition 1: 8MB for fat16 format, then set boot mode using fdisk. partition 2: rest of size for ext4 format.

Step 5. Format SD card Format /dev/sdx1 as FAT16 and ext4 type for /dev/sdx2.

Step 6 Make SD card bootable

Copy SPL image to the unpartitioned are before the first partition using command the command:

# sudo dd if=SPL of=/dev/sdX bs=1k seek=1 oflag=dsync

Copy u-boot.img, zImage, wandboard dtb files into /dev/sdx1

Step 7. Prepare rootfs

Extract Geexbox rootfs tar file to /dev/sdx2